Your shopping cart is empty!
Welcome visitor you can login or create an account.

Mercury Adhesives MH16 Accelerator (2 oz.)

Mercury Adhesives MH16 Accelerator (2 oz.)
Brand: Mercury Adhesives
Product Code: Mercury MH16 (2oz)
Availability: Out Of Stock
$4.99
 
   - OR -   

MH16 Accelerator (2 oz. Pump):

DESCRIPTION: Mercury MH16 is a General Activator accellerator. It is ozone friendly and used for normal curing of cyanoacrylates, depositing a correct balance of neutralizing ions on the surface, stimulating attrition for the adhesive and preparing the surface for bonding.

APPLICATIONS: Mercury MH16 is primarily designed for fast cure of thick deposits or for post curing outside the bond line. MH16 prevents absorption of the lower viscosity superglues into porous items. MH16 helps bridge gaps which decrease polymerization time.

USEFUL HINTS/NOTES: Mercury MH16 can be used to speed cure by brushing or spraying onto the surface, applying drop wise, the superglue and then over spraying to cure fillets such as on wire tacking jobs. Works best under repeated applications rather than one excessively large application.


What makes Mercury Adhesives glues so great? Unlike most CA products on the market, Mercury Adhesive products are not industrial remnants or leftovers made overseas -- Mercury Adhesives glues are made right here in the USA. Because of their high quality, ALL Mercury CA's come with an unconditional 2-year warranty. This is why the best builders choose Mercury!

Tired of your CA bottle nozzle clogging? (Aren't we all!) Some companies have claimed to have a clog free nozzle, which in reality is only a very long nozzle that you keep snipping the clogged end off until there is no nozzle left and still end up throwing it away. Mercury Adhesives has actually engineered a nozzle that not only will not clog but has 3 different points of seal to assure the product inside is kept fresh and away from moisture. This cap has a blunt nose and stainless steel pin molded into the cap, which engages into the orifice of the nozzle (not scratching the insides of the bottle) to keep the orifice clean. Inside the tip is a calculated venturie shape, which pulls the CA out of the tip and back into the bottle once the bottle is stood upright. On the very tip of the nozzle is a tapered seat which engages with a tapered boss in the cap creating compression on the tip of the nozzle keeping the nozzle clean and the product inside fresh. If the cap is replaced each time the user is finished with the product the nozzle will never clog!

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



Back to Top
Loading...
Loading...