Your shopping cart is empty!
Welcome visitor you can login or create an account.

Suppo HW40A Brushless ESC w/ HobbyWing Firmware

Suppo HW40A Brushless ESC w/ HobbyWing Firmware
Brand: Suppo
Product Code: Suppo HW40A
Availability: In Stock
$13.99
 
   - OR -   

These ESCs combine the quality and affordability of Suppo speed controllers with the functionality of popular HobbyWing firmware!

We recommend the HW series ESCs over the yellow-wrapper Suppo ESCs. Our sources indicate these speed controllers are very similar (if not the same) to the popular Turnigy Plush ESCs. We've found the quality of the Suppo HW series is better than the original Suppo yellow-wrapper series and we hear of very few reported issues. In addition, you get many more programming options and the ability to easily configure settings with the optional program card.

We've also found these ESCs work much better with high RPM motors than the standard Suppo firmware ESCs. We recommend the HW-series ESCs for all our Suppo motors, but especially those with higher KVs such as the Suppo 2212/6 2200kv.

Each ESC is PRE-SOLDERED with 3.5mm female gold bullet connectors. No battery connector included.

Specifications:

● Constant current 40A - Max 50A (<10 sec.)
● 2-3s Lipoly; 6-10 cells Ni-MH
● BEC: 2A, Linear
● Dimensions: 62x26x6 (mm)
● Weight: 32g

Compatible with the HobbyWing V1 LED program card: http://www.altitudehobbies.com/suppo-brushless-escs/programming-card-for-hobbywing-escs

Programmable Options:

1. Brake on/off
2. Battery type
3. Cut off type
4. Cut off Voltage
5. Start Mode
6. Timing Mode
7. Music Lipo-cells
8. Governer Mode

Programming manual download

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



Back to Top
Loading...
Loading...