HobbyWing Platinum Pro V4 Series 130A HV ESC (6-14s)
Super Soft Start-up
Platinum V4 serial products allows the motor to start extremely smooth and avoids tail-drift
issues that helicopters experience. The start-up time is adjustable from 8 to 25 seconds,
this will definitely create a perfect starting point for every flight.
Excellent Motor Speed Governing
High-performance 32-bit processor with a running frequency of 72MHz combined with
advanced algorithm optimizes the speed governing. Together with the adjustable
governor parameters guarantee every pilot a precise control experience.
High Voltage Built-in BEC
The built-in switch mode BEC with an adjustable voltage range from 5V to 8V, a continuous current of over 10A and peak current of 25A can supply enough power for your servos to operate efficiently.
Setup, Program and Firmware update
A separate program port for connecting programmer on this ESC allows user to
•Check flight data include minimum voltage, maximum temperature, standardized RPM and speed curve
(in Heli Governing Store mode) of the flight parameters recorded by the ESC,
•Upgrade ESC firmware with a mutifunction LCD program box or a WiFi Module (need to be purchased separately) with Apple/Android phone App.
The DEO (Driving Efficiency Optimization or so-called “Active Freewheeling”)
technology implemented in the ESC has multiple advantages.
•Rapider response to throttle change.
•Higher driving efficiency, longer flight time.
•Lower ESC temperature and a more reliable operation.
|Platinum 130A-HV V4 ESC
|550-600 Class Helicopter
|Cont./Peak Current (10s)
|Separate Programming Port
|For connecting LCD Program Box/OTA Programmer
|Throttle Signal/BEC Output/RPM Signal Transmission Wire(s)
|White Throttle Signal Wire/Red & Black and Red&Brown BEC Output Wires/Yellow RPM Signal Transmission Wire
|4.0mm Gold Connectors (Female)
|169g / 5.96oz
*Note: All the wire length above is the original length not the length you see from the outside.
Compatible with the following program cards:
Programmable only through optional LCD program box or OTA Programmer. Cannot be programmed via transmitter.