ZTW Gecko Series 45A Brushless ESC w/ 5A Adjustable SBEC

ZTW Gecko Series 45A Brushless ESC w/ 5A Adjustable SBEC


ZTW Gecko 45A

In Stock

Regular price $35.99

ZTW GECKO SERIES Airplane/Heli ESCs are competition-grade speed controllers from one of the most trusted RC electronics manufacturers in the industry. NEW FEATURES found in Gecko Series ESCs include PC data logging, firmware upgradability, and a larger SBEC. Best of all, Gecko Series ESCs come standard with the ZTW quality, performance, and reliability you have come to trust.

The high power SBEC found in ZTW Gecko Series ESCs has been specifically designed for extreme aerobatics and therefore has the capability to support the higher momentary peak demand loads to eliminate the possibility of unwanted shutdowns, and is also capable of supporting continuous simultaneous multiple servo operations typically found in CCPM equipped hardcore 3D E-helicopters.

  • Data logging via PC interface (optional accessory included with program card)
  • Firmware upgradable via PC interface
  • High SBEC current output: 5A continuous
  • Adjustable SBEC voltage up to 6.0v (up to 8.4v on 65A and above models)
  • Extremely low internal resistance
  • Smooth and accurate throttle linearity
  • Power arming protection, over-heat protection, low-voltage protection and lost signal protection
  • Supports high RPM motors
  • Advanced governor mode and soft start
  • Optional programming card & PC USB interface available
  • Output: 45A continuous, 65A burst for 10 seconds
  • Input voltage: 2-6s LiPo; 5-18 cell Ni-XX
  • SBEC output: 5.0v/6.0v adjustable @ 5A (switching)
  • Weight: 59g
  • Dimensions: 59 x 33 x 11.5mm

Programmable Options:

  • Brake setting (off / soft / mid / hard -- default: off)
  • Battery type: (Ni-XX / LiPo / LiFe -- default: LiPo auto detect)
  • Cut-off voltage threshold (2.8V 50% / 3.0V 60% / 3.2V 65% / No protection -- default: 3.0V 60%)
  • Factory default setup reset
  • Timing settings (auto / 2° / 8° / 15° / 22° / 30° -- default: auto)
  • SBEC Voltage Output (5.0v / 6.0v -- default: 5.0v)
  • Governor mode: (RPM off / 1st Soft Start / 2nd Soft Start / Gov Mode 1 / Gov Mode 2 -- default: RPM off)
  • Motor rotation: (forward / reverse -- default: forward)
  • Start up (Low / Mid / High-- default: 30%)
  • LVC cut-off type: (reduce gradually / cut-off -- default: reduce gradually)

Click here to download the ZTW GECKO Series ESC Programming Manual

Click here to download the ZTW GECKO Series PC Software