Mercury Adhesives M68DB Debonder (2 oz.)
M68DB Debonder (2 oz. Pump):
DESCRIPTION: Mercury M68DB is a debonder especially formulated for Mercury CA adhesives. It is a clear liquid with a relatively low evaporation rate that attacks and dissolves cured or uncured Instant Superglue (cyanoacrylate).
APPLICATIONS: Can be used to debond misaligned parts or clean up excess adhesive. It also is useful for removing spilled adhesives from work area. Debonds accidentally bonded skin.
USEFUL HINTS/NOTES: Mercury M68DB Debonder works best under repeated applications rather than one excessively large application. Apply debonder, allow it to dissolve hardened superglue and repeat as necessary. Use in an inconspicuous area for testing. May attack certain plastics and remove paint or varnish.
What makes Mercury Adhesives glues so great? Unlike most CA products on the market, Mercury Adhesive products are not industrial remnants or leftovers made overseas -- Mercury Adhesives glues are made right here in the USA. Because of their high quality, ALL Mercury CA's come with an unconditional 2-year warranty. This is why the best builders choose Mercury!
Tired of your CA bottle nozzle clogging? (Aren't we all!) Some companies have claimed to have a clog free nozzle, which in reality is only a very long nozzle that you keep snipping the clogged end off until there is no nozzle left and still end up throwing it away. Mercury Adhesives has actually engineered a nozzle that not only will not clog but has 3 different points of seal to assure the product inside is kept fresh and away from moisture. This cap has a blunt nose and stainless steel pin molded into the cap, which engages into the orifice of the nozzle (not scratching the insides of the bottle) to keep the orifice clean. Inside the tip is a calculated venturie shape, which pulls the CA out of the tip and back into the bottle once the bottle is stood upright. On the very tip of the nozzle is a tapered seat which engages with a tapered boss in the cap creating compression on the tip of the nozzle keeping the nozzle clean and the product inside fresh. If the cap is replaced each time the user is finished with the product the nozzle will never clog!